Paralysis bounds mobility. Wheelchairs, like humans, may help your canine fellow move around freely. Whether partially or entirely paralyzed, he can enjoy life to the fullest by using a doggie wheel chair.

You may get a commercially made wheelchair for dogs. However, it will cost you more than a Do It Yourself dog wheelchair. So to get a cheaper solution with customized sizes and materials, you can build a dog front leg wheelchair yourself.

Keep reading to get helpful information regarding your pup’s wheelchair.

dogs wheelchair 

Why Do Dogs Need Wheel Chairs?

Difficulty in the movement of any part of the body refers to paralysis. Dogs may experience rear limb or front limb paralysis. Some cannot move, whereas others may experience partial paralysis (paresis). Dogs may become aggressive and hyper due to their disability.

In such cases, dogs need help to move. Wheelchair dogs can also enjoy their life to the fullest.


By building walking wheels dog wheelchair.

There are two types of wheel chairs for dogs that are commonly used. These are:

· Two-wheeled chairs for dogs with partial paralysis

· Quad chairs for dogs with no mobility

Two-Wheeled Chairs

These doggie wheelchairs support your puppy’s front or back legs. These are lightweight and easy to move.

These chairs are designed to support the dog’s body weight fully. Your pup can freely move around as these are the best chewy dog wheelchairs that allow running, bending, and walking conveniently. These wheelchairs are of two types:

· Dog hind leg wheelchair (dog wheelchair for back legs)

Dogs with the following conditions may benefit from dog wheelchairs for back legs.


§Ruptured disc

§Hip dysplasia

§IVDD (Intervertebral Disc Disease)

§Generalized weakness


· Forelimb wheelchair (front leg dog wheelchair)

Severe arthritis problems or post-surgical conditions may lead to affected front legs mobility. Front leg wheelchair for dogs may help your puppy in the following situations:

§Post-surgical support for hips, knees, and disc

§Spinal trauma




§Degenerative Myelopathy

You shall consult your pup’s vet before finalizing the appropriate wheelchair.

Disabled white dog with wheelchai


· Quad Chairs

It’s a full support dog wheelchair. These are four-wheeled paralyzed dog wheelchairs. Sometimes all your dog needs are support. You can use a 4 wheel wheelchair for dogs who are partially paralyzed.

This chair can protect them from stumbling and falling. These chairs help relieve the spine stress due to post-surgery or some disease.

However, these chairs are comparatively more expensive than two-wheeled chairs.

Happy cute little dog in wheelchair or cart walking in grass field


Different Materials Used to Build Doggie Wheel Chairs

You can make a dog walker with wheels with different materials. These materials have other specifications and benefits. Let’s look at various materials you can use to construct your best friend mobility dog wheelchair.


PVC pipes and elbows are suitable for building lightweight and cheap dog wheelchairs. These are appropriate wheelchair for small dogs. But it doesn’t mean you cannot make a wheelchair with PVC pipes for bigger fellows.

Its flexibility ensures the chair’s longevity and easy mobility for the dog. It is also rust-resistant. Furthermore, PVC pipes are easy to handle. An average dog owner without professional tools can build it conveniently.

· Aluminum

Aluminum is another rust-resistant material with a long life. Dogs wheelchairs made with aluminum give more of a professional look.

However, the tools needed to construct these dog wheels are primarily unavailable in homes. Also, you must be more skillful in building an aluminum wheelchair for your canine fellow.

On the other hand, aluminum piping makes a strong frame. Thus, these make the best large dog wheelchair.


· Sling-Style Chairs

Regarding full-body support, sling-style chairs are the best solution. These are the most appropriate doggie wheelchair for small dogs. However, you may upsize it to suit a bigger one.

Due to its full-body-support design, it is more appropriate for dogs that can’t use all four legs. The PVC pipes and cloth makes it lightweight and cost-friendly.

· Acrylic for 3D Printed Wheelchair

You can use acrylic rather than PVC pipes to look fantastic on your dog’s wheelchair. 3D-printed acrylic pipes provide a trendy and artistic look to the wheelchair.

However, for this, you need to have a 3D printer. If you don’t have any, no problem. Simple acrylic pipes also look classy.

· Steel Tubing

Metal is always a solid solution as compared to PVC pipes. Similar to aluminum pipes, steel tubes need more professional tools and artistry.

But once it is made, you will experience a professional-looking and solid wheelchair for your best four-legged buddy.

Now comes the most commonly asked question, how to make a front support dog wheelchair? Let’s proceed to know the answer.

Steps to Make Wheel Chairs for Dogs

You can conveniently build large, small, and medium dog wheelchair at home. By following these steps, you can make a fantastic homemade dog wheelchair for your canine fellow.

· Take Measurements

The first step is to take the measurements. The best dog wheelchair is the one that makes mobility and rides easy and comfortable.

It is the best thing about DIY wheelchairs. You can adjust the height and measurements according to your puppy’s size. You need to measure:

Dog’s Chest

Dog’s chest includes its complete round measurement, rib’s length, and dog’s entire length from front foot heels to back foot toes.

Paraplegic dachshund senior do 

Dog’s Height

You must thoroughly measure the front height of your puppy. Front height means the top of the shoulder to the floor, and back height means hip to the floor.

Dog’s Width

Also, you need to measure the dog’s shoulder width and hips.

How to Take Measurements?

It would help if you took proper measurements by keeping your cuddling fellow standing. A fully stretched body gives you the perfect size whether you are making:

· DIY small dog wheelchair

· DIY wheelchair for large dogs

measure your puppy

For your fully grown pet, you can build a customized wheelchair as per his size. For the small dog, you can either construct an adjustable wheelchair or make a new one in the future.

Similarly, you can also construct a wheelchair for dog back legs by taking desirable measurements.

For your assistance here are some charts showing wheelchair sizes:

Wheelchair for Dogs Hind Legs


7” – 14”


15” – 23”


24” – 34”

Quad Wheelchair for Dogs


15” – 17”


16” – 20”


20” – 27”

Sitgo Dog Wheelchair


15” – 17”


16” – 20”


20” – 29”

· Collect All the Necessary Parts

The necessary things you need to construct wheels for crippled dogs are:

Tubes of suitable material (PVC, aluminum, steel, or acrylic)


Fabric for saddle





The first step is to make the frame. The connectors and glue are essential in constructing whatever material you use.

The frame shall not touch the pet’s body. It will cause discomfort and sores. You should sketch your design on paper to know the exact amount of pipes and connectors you need for the frame.

rehabilitation of a disabled dog in a wheelchair. pet trainin 

Drilling in the Tube

After cutting and putting the tubes together, it’s time to drill holes in the pipes for wheels.

· Wheels

Wheels must be attached firmly to the frame. They must move freely without wobbling. Moreover, select the wheels according to your pup’s routine. If he walks outdoor, you need to attach sturdier wheels.

· Saddle

Fabric-based or padded – these are the two ways to construct the saddle. Padded saddles provide better support and fewer chances of discomfort or soreness. However, adequately sewed fabric with maximum support to the pelvic area may also adequately support your pup’s body.

· Final Settings

After putting and joining every part in place, it’s time to put your pup in the dog carts for back legs. Being the chest straight in the front part of the cart ensures that the shoulders are free to move. Moreover, no tube must rub against the body while moving.

Too tight or too loose straps may result in abrupt movement. Also, the back must be straight. Otherwise, it will make the activity difficult.

How to make a dog wheelchair for back legs?

That’s not a big deal. In the same way, you can create a back legs k9 wheelchair for your pup. Or you may also get it from Loobani.

Helpful Tips while Building Your Pup’s Wheelchair

· Material According to Your Budget 

There are alternate options when choosing materials for your wheelchair for dog. If you are on a budget and looking for a way around spending on a PVC cutter, you can use an ordinary handsaw or rent one.

A saw will also do just fine slicing through a PVC pipe. However, a PVC cutter does propose advantages. It will cut through the pipe quickly and smoothly, without leaving sharp edges. So it’s recommended to opt for a PVC cutter if your budget allows.

As for the PVC glue, it is not an absolute necessity either. PVC pipes can fit perfectly together and securely enough for regular use. Plus, not using the glue will allow you to disassemble the dog wheelchair easily whenever you want.

Dog with invalidity posing for phot 

· Material and the Weather Conditions

While choosing the material or fabric for the saddle of the DIY dog wheelchair, consider the weather where your dog lives. It is a crucial factor to keep your dog comfortable. If the weather is hot, you would not want to choose a fabric that makes it worse for your pup.

Choose a light mesh-based or breathable fabric for hotter weather conditions, so your dog in wheelchair can remain relaxed. If the weather is cold, go for a warmer material so your dog can stay warm. 

· Cover Sharp Objects 

Sharp edges or pointy items on the wheelchair for dogs can not only hurt your dog but can scratch your walls and furniture as well. So make sure to cover sharp objects on your DIY small dog wheelchair to keep your dog in a wheelchair and belongings safe.

· Locks for Casters

Locks for casters in doggy wheelchairs can come in handy at times. Making one of the casters in the doggie wheel chair, a locking caster can allow you to immobilize your dog running in wheelchair. This feature provides you control and a safe option as well.

· Solution for Wheelchair Tipping Over

The dog’s wheelchairs tipping over can be a problem, but there is a solution. By adding some weight to the bottom of the wheelchair, you can keep it from tipping over.

A convenient way to do that is to fill a PVC tube with sand. Too much weight is not required, so add some sand and seal the ends of the tube properly.   

Ways to Get Your Dog Used to the Front Wheelchair

Building wheels for handicapped dogs is one thing, but getting your dog used to the wheel chair is an altogether different struggle. Here is what you can do to make that happen.

· Make It Comfortable

If your dog is not comfortable, there is no chance it will get on the ride. So it would help if you made the wheelchair comfortable for your dog. Be mindful while constructing the wheelchair that it is not uncomfortable for your dog. Because the primary purpose is the construct wheels to help dogs walk.

Ensure the saddle is comfortable and the structure is not rough against the dog’s skin. After putting the dog in the chair, tweak the sponge tubes according to your dog’s comfort.  

· Give Your Puppy Time

Please don’t put your dog in the wheelchair right away. Give him some time to probe the chair first. Stay calm and let your dog examine the chair on its own. When he is done, put him in the chair. Even after that, don’t expect him to ride around intuitively.

Your dog will fidget and struggle, so give him time to adjust and don’t lift him off. Make sure he is resting comfortably and that nothing is bothering him. It might take, around 15 minutes, but your pup will finally come around and stop complaining.

Woman hugging her dog 

· Encouragement Can Do the Magic

It’s natural for your dog to whine and attempt to escape from the chair since it is not something intuitive. You might find it difficult to bear when he starts to struggle, but stay patient and be encouraging.

Sit close to the wheelchair and lean back calmly to encourage your dog that he is going to be okay. To get him moving, you can start moving around yourself, so your dog can follow you and figure out the whole process.

You can also pull him with a rope or bribe him with a treat. The key is to keep trying and to stay encouraging.

Can Your Puppy Pee in a Front Wheelchair?

It might be your biggest concern if your dog with wheelchair can relieve himself. Well, yes, he can easily pee in a front wheelchair without facing any problems or discomfort. There will not be any other thing you will need to do; the process is the same regardless of the wheelchair.

The chair is designed to stay out of the way, so it’s not like you will have to clean it every time your dog relieves himself. Your dog will not squat. Rather just spread the hind legs to get the job done.

The dog back leg wheels might even improve your dog’s internal functions. Your crippled dog might have a disturbed digestive system because of the lack of movement. 

A dog rear leg wheelchair can help him move, optimize their natural functions, and keep them healthy.

Can You Make Dog Wheelchairs for Back Legs?

Yes, you can make a wheelchair for dogs back legs if your dog needs hind support. Dog rear wheelchair is ideal for dogs with rear leg injuries or weakness. A dog back wheelchair provides balance and support from underneath, allowing mobility to your dog. 

Benefits of Front Leg Wheelchair for Dogs

A wheelchair dog may get many benefits from his cart. It helps dogs with front leg paralysis, weakness, arthritis, nervous system issues, or amputations. 

It offers mobilization to dogs, making them more active and healthy. The increased movement not just improves the muscle health of the dog but the inner functions and health as well. 

How Much Is a Dog Wheelchair?

Carts for dogs back legs may cost you a fortune or come under $50, depending on your choices. You can find costly items if you want to purchase a dog wheelchair from the market. A customized one for your dog will be even costlier. 

However, there are ways with which you can reduce your dog wheelchair cost. For example, building a free dog wheelchair by yourself will be much more affordable. So, if you don’t want to spend a big chunk of money, opt for a DIY dog wheel chair put together by the garbage rotting in your garage.

You can build a dog wheelchair for less than $50. In fear of overspending, don’t use cheap quality materials, though. Spending some bucks on quality materials is worth it if you want comfortable and reliable dog wheels for back legs

Are There Any Alternatives for Dog Wheelchairs?

There are several other alternatives for dog wheelchairs that you can choose from. Those are described below.

· Dog Strollers 

You can always get a dog stroller if you want to move your dog around. It is an easy alternative that saves you from building a dog wheelchair. Dog strollers are similar to baby strollers, except the former is designed for dogs’ form and comfort.

· Backpacks

Backpacks are a particularly effective way if your dog is a bit heavier. Plus, dogs love to ride on their owners’ backs. Hence, backpacks are another more accessible alternative to wheelchairs. However, be careful to carry too much weight on your back, or you will end up hurting yourself.  

dog backpack 


A wheelchair can prove to be a lifesaver for your dog. It’s not difficult to understand how immobility can frustrate and depress your dog. And that is not all. Your dog’s physical health can see improvement too. 

As this article describes, you don’t have to spend on an expensive custom front leg wheelchair for your dog. A DIY dog front leg wheelchair can save you lots of money and be the right fit for your dog.


Leave a Reply

Your email address will not be published.